With the FastATA 1200 controller you can now take advantage of the latest low-cost, high-capacity ATA/EIDE devices like hard drives, CD-ROM drives, CD-RW drives, ZIP drives, LS-120 drives, etc.


The minimum hardware configuration is: Amiga 1200 in desktop case with a 4MB RAM expansion card.

The recommended configuration is: Amiga 1200 in E/BOX tower case, any 68060 (or PPC with 68060) turbo card with 32MB RAM.


The FastATA 1200 controller features represent the ultimate technology in its category:
• Fast transfer rate of up to 16.6MB/s
The FastATA controller with its maximum transfer rate of 16.6MB/s in the PIO 4 mode offers a huge capacity reserve for fast mass storage devices, especially for fast hard drives. Therefore, applications may run much faster if they can count on fast access to large data files.
• Support for ATAPI standard devices
The FastATA 1200 controller implements the ATAPI standard as well, for use with devices like CD-ROM, CD-R, CD-RW, ZIP, LS-120, DVD drives. This enables connection of ATAPI-standard devices to the Amiga with no need of installing additional software.
• Two buffered and terminated EIDE ports
The controller operates with two EIDE ports, which enable installation of up to 4 IDE/EIDE/ATAPI devices. Both controller ports are fully buffered and terminated in accordance with the recommendations set forth in the ATA-3 specification. Compatible with PIO-0, PIO-3, PIO-4, ATA/33, ATA/66, ATA/100 ATA/133 devices.
• Full compatible with HDDs of over 4GB
Limitations on support for >4GB HDDs have been
eliminated in the FastATA 1200 controller. The FastATA 1200 controller may be used with >4GB HDDs with any FastFileSystem used.
• Automatically configured devices
The controller automatically recognises any device attached to it, negotiates the highest possible data transfer rates, switches the device into its appropriate mode and transfers data at the maximum transfer rate.
• Automatic processor type recognition
The FastATA 1200 controller automatically detects type of processor and optimises and modifies some software routines in order to achieve the highest possible data transfer rate between the controller and the computer memory.
• 32-bit access
The computer recognises the controller as a 32-bit device configured in the motherboard IDE port space. Full 32-bit operation of the controller combined with very efficient software guarantee significant increase in the speed of your computer.

The FastATA 1200 controller is compatible with all the major A1200 turbo card models and memory expansion cards.

The FastATA 1200 controller is designed for operating with the following turbo cards: Blizzard PPC/060, Blizzard PPC/040, Blizzard 1260, Apollo 1260, Blizzard 1240, Apollo 1240, Blizzard 1230 (III, IV), Apollo 1230, GVP 1230, Elbox 1230 and M-Tec 1230.

The FastATA 1200 controller has been designed to fit inside the Amiga 1200 in its standard casing or in any Tower-type casing.

The FastATA 1200 controller has to be installed on the Amiga 1200 motherboard. The two boards that constitute the controller are inserted in the ROM sockets and on top of the GAYLE chip.

All installation steps are shown in FastATA 1200 Quick Installation Guide.

The FastATA 1200 controller is available with a standard software pack including FastATA'99 software.

FastATA'99 software bundled with FastATA 1200 controllers provides support for:
• HDD drives,
• CD-ROM drives,
• CD-R drives,
• CD-RW drives,
• ZIP drives,
• LS-120 drives.

The FastATA 1200 is also available with an extended software pack with Allegro CDFS included.

FastATA 1200 controller Suggested Retail Price (VAT and local taxes excluded): see Product Price List.

FastATA 1200 is also available under the following trademarks:
A1200 PowerFlyer in United Kingdom,
A1200 Winner High-Speed Controller in Germany.