With the FastATA 4000 controller you can now take advantage of the latest low-cost, high-capacity ATA/EIDE devices like hard drives, CD-ROM drives, CD-RW drives, ZIP drives, LS-120 drives, etc.

The minimum hardware configuration is: Amiga 3000 or Amiga 4000.

The recommended configuration is: Amiga 3/4000 with 68060 (or PPC with 68060) processor card with 64MB RAM.

The FastATA 4000 controller features represent the ultimate technology in its category:
• Fast transfer rate of up to 16.6MB/s
The FastATA controller with its maximum transfer rate of 16.6MB/s in the PIO 4 mode offers a huge capacity reserve for fast mass storage devices, especially for fast hard drives. Therefore, applications may run much faster if they can count on fast access to large data files.
• Support for ATAPI standard devices
The FastATA 4000 controller implements the ATAPI standard as well, for use with devices like CD-ROM, CD-R, CD-RW, ZIP, LS-120, DVD drives. This enables connection of ATAPI-standard devices to the Amiga with no need of installing additional software.
• Two buffered and terminated EIDE ports
The controller operates with two EIDE ports, which enable installation of up to 4 IDE/EIDE/ATAPI devices. Both controller ports are fully buffered and terminated in accordance with the recommendations set forth in the ATA-3 specification. Compatible with PIO-0, PIO-3, PIO-4, ATA/33, ATA/66, ATA/100 ATA/133 devices.
• Fully compatible with HDDs >4GB HDDs
Limitations on support for >4GB HDDs have been
eliminated in the FastATA 4000 controller. The FastATA 4000 controller may be used with >4GB HDDs with any FastFileSystem used.
• Automatically configured devices
The controller automatically recognises any device attached to it, negotiates the highest possible data transfer rates, switches the device into its appropriate mode and transfers data at the maximum
transfer rate.
• Automatic processor type recognition
The FastATA 4000 controller automatically detects type of processor and optimises and modifies some software routines in order to achieve the highest possible data transfer rate between the controller and the computer memory.
• 32-bit access
The computer recognises the controller as a 32-bit device configured in the Zorro III address space. Full 32-bit operation of the controller combined with very efficient software guarantee significant increase in the speed of your computer.

The FastATA 4000 controller is available with a standard software pack including FastATA4000 software.

FastATA4000 software bundled with FastATA 4000 controllers provides support for:
• HDD drives,
• CD-ROM drives,
• CD-R drives,
• CD-RW drives,
• ZIP drives,
• LS-120 drives.

The FastATA 4000 is also available with an extended software pack with Allegro CDFS included.

Info on the current software versions is available in the DOWNLOADS | FastATA section.

FastATA 4000 controller Suggested Reatil Price (VAT and local taxes excluded): see Product Price List.

FastATA 4000 is also available under the following trademarks:
A4000 PowerFlyer in United Kingdom,
A4000 Winner High-Speed Controller in Germany.