configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
multidirs=libb libm020 libm020/libm881 libb/libm020 libb/libm020/libm881 libb32/libm020 libb32/libm020/libm881
with_multisubdir=
Running configure in multilib subdirs libb libm020 libm020/libm881 libb/libm020 libb/libm020/libm881 libb32/libm020 libb32/libm020/libm881
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib
Running configure in multilib subdir libb
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libb
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -fbaserel accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libb
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel' 'CXX=m68k-amigaos-g++  -fbaserel' 'F77= -fbaserel' 'GCJ= -fbaserel' 'GFORTRAN= -fbaserel' 'GOC= -fbaserel' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel
checking dependency style of m68k-amigaos-gcc  -fbaserel... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libm020
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libm020
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -mcpu=68020 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libm020
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020' 'CXX=m68k-amigaos-g++  -mcpu=68020' 'F77= -mcpu=68020' 'GCJ= -mcpu=68020' 'GFORTRAN= -mcpu=68020' 'GOC= -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libm020/libm881
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libm020/libm881
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libm020/libm881
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libm020/libm881/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -mcpu=68020 -m68881' 'F77= -mcpu=68020 -m68881' 'GCJ= -mcpu=68020 -m68881' 'GFORTRAN= -mcpu=68020 -m68881' 'GOC= -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libb/libm020
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libb/libm020
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libb/libm020
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020' 'F77= -fbaserel -mcpu=68020' 'GCJ= -fbaserel -mcpu=68020' 'GFORTRAN= -fbaserel -mcpu=68020' 'GOC= -fbaserel -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libb/libm020/libm881
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libb/libm020/libm881
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libb/libm020/libm881
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb/libm020/libm881/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel -mcpu=68020 -m68881' 'F77= -fbaserel -mcpu=68020 -m68881' 'GCJ= -fbaserel -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel -mcpu=68020 -m68881' 'GOC= -fbaserel -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libb32/libm020
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libb32
mkdir libb32/libm020
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libb32/libm020
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020' 'F77= -fbaserel32 -mcpu=68020' 'GCJ= -fbaserel32 -mcpu=68020' 'GFORTRAN= -fbaserel32 -mcpu=68020' 'GOC= -fbaserel32 -mcpu=68020' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
Running configure in multilib subdir libb32/libm020/libm881
pwd: /srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib
mkdir libb32/libm020/libm881
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for gawk... (cached) mawk
checking for .preinit_array/.init_array/.fini_array support... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
no
checking if m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -fno-tree-loop-distribute-patterns with __attribute__ ((__optimize__))... yes
checking whether long double type exists... yes
checking whether long double equals double... no
configure: creating ./config.status
config.status: creating Makefile
Adding multilib support to Makefile in /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib
with_multisubdir=libb32/libm020/libm881
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/libb32/libm020/libm881/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--with-multisubdir=libb32/libm020/libm881' '--with-multisrctop=' '--enable-multilib' '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' 'CC=m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881' 'CXX=m68k-amigaos-g++  -fbaserel32 -mcpu=68020 -m68881' 'F77= -fbaserel32 -mcpu=68020 -m68881' 'GCJ= -fbaserel32 -mcpu=68020 -m68881' 'GFORTRAN= -fbaserel32 -mcpu=68020 -m68881' 'GOC= -fbaserel32 -mcpu=68020 -m68881' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881
checking dependency style of m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc  -fbaserel32 -mcpu=68020 -m68881 accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
config.status: creating _newlib_version.h
config.status: creating newlib.h
config.status: executing depfiles commands
=== configuring in libc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking Checking long double support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating argz/Makefile
config.status: creating ctype/Makefile
config.status: creating errno/Makefile
config.status: creating locale/Makefile
config.status: creating misc/Makefile
config.status: creating reent/Makefile
config.status: creating search/Makefile
config.status: creating stdio/Makefile
config.status: creating stdio64/Makefile
config.status: creating stdlib/Makefile
config.status: creating string/Makefile
config.status: creating time/Makefile
config.status: creating posix/Makefile
config.status: creating signal/Makefile
config.status: creating syscalls/Makefile
config.status: creating unix/Makefile
config.status: creating iconv/Makefile
config.status: creating iconv/ces/Makefile
config.status: creating iconv/ccs/Makefile
config.status: creating iconv/ccs/binary/Makefile
config.status: creating iconv/lib/Makefile
config.status: creating ssp/Makefile
config.status: creating xdr/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libc/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in m68k (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libc/machine/m68k)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/machine/m68k
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in sys (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libc/sys)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in amigaos (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libc/sys/amigaos)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libc/sys/amigaos
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in libm (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libm)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking Checking long double support... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: creating math/Makefile
config.status: creating mathfp/Makefile
config.status: creating common/Makefile
config.status: creating complex/Makefile
config.status: executing depfiles commands
=== configuring in machine (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/libm/machine)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/libm/machine
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
=== configuring in doc (/srv/ARM/akb/amiga-gcc/build-Linux-m68k-amigaos/newlib/newlib/doc)
configure: running /bin/bash /srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/doc/configure --disable-option-checking '--prefix=/opt/amiga'  '--host=m68k-amigaos' '--enable-newlib-io-long-long' '--enable-newlib-io-c99-formats' '--enable-newlib-reent-small' '--enable-newlib-mb' '--enable-newlib-long-time_t' 'host_alias=m68k-amigaos' 'CC=m68k-amigaos-gcc' 'CFLAGS=-O2 -fomit-frame-pointer' --cache-file=/dev/null --srcdir=/srv/ARM/akb/amiga-gcc/projects/newlib-cygwin/newlib/doc
configure: WARNING: if you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used
checking build system type... aarch64-unknown-linux-gnu
checking host system type... m68k-unknown-amigaos
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-amigaos-strip... m68k-amigaos-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... m68k-amigaos-gcc
checking dependency style of m68k-amigaos-gcc... gcc3
checking whether we are using GNU C... yes
checking whether m68k-amigaos-gcc accepts -g... no
checking for m68k-amigaos-as... m68k-amigaos-as
checking for m68k-amigaos-ar... m68k-amigaos-ar
checking for m68k-amigaos-ranlib... m68k-amigaos-ranlib
checking for m68k-amigaos-readelf... m68k-amigaos-readelf
checking whether to enable maintainer-specific portions of Makefiles... no
checking for build system executable suffix... no
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands